View CBTD3384_151648.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

INTEGRATED CIRCUITS
CBTD3384 10-bit level shifting bus switch with 5-bit output enables
Product data Supersedes data of 2000 Aug 30 File under Integrated Circuits -- ICL03 2001 Dec 20
Philips Semiconductors
Philips Semiconductors
Product data
10-bit level shifting bus switch with 5-bit output enables
CBTD3384
FEATURES
* 5 switch connection between two ports * TTL compatible control input and output levels * Designed to be used in 5 V to 3.3 V level shifting applications * Latch-up protection exceeds 500 mA per JESD78 * ESD protection exceeds 2000 V HBM per JESD22-A114, and
1000 V CDM per JESD22-C101
PIN CONFIGURATION
1OE 1B1 1A1 1A2 1B2
1 2 3 4 5 6 7 8 9 10 11 12
24 23 22 21 20 19 18 17 16 15 14 13
Vcc 2B5 2A5 2A4 2B4 2B3 2A3 2A2 2B2 2B1 2A1 2OE
DESCRIPTION
The CBTD3384 provides ten bits of high-speed TTL-compatible level shifting bus switching. The low on-state resistance of the switch allows connections to be made with minimal propagation delay. The gate voltage of the enabled switch is lowered by a diode to allow convenient level shifting between 5 V and 3.3 V levels on either side of the CBTD3384. The CBTD3384 device is organized as two 5-bit bus switches with separate output-enable (OE) inputs. When OE is low, the switch is on and port A is connected to B. When OE is high, the switch is open and high-impedance state exists between the two ports. The CBTD3384 is characterized for operation from -40 to +85 C.
1B3 1A3 1A4 1B4 1B5 1A5 GND
SA00502
PIN DESCRIPTION
PIN NUMBER 1, 13 3, 4, 7, 8, 11 14, 17, 18, 21, 22 2, 5, 6, 9, 10 15, 16, 19, 20, 23 12 24 SYMBOL 1OE, 2OE 1A1-1A5 2A1-2A5 1B1-1B5 2B1-2B5 GND VCC NAME AND FUNCTION Output enables Inputs Inputs Outputs Outputs Ground (0V) Positive supply voltage
QUICK REFERENCE DATA
SYMBOL tPLH tPHL CIN COUT ICCZ PARAMETER Propagation delay An to Yn Input capacitance Output capacitance Total supply current CONDITIONS Tamb = 25 C; GND = 0 V CL = 50 pF; VCC = 5 V VI = 0 V or VCC Outputs disabled; VO = 0 V or VCC Outputs disabled; VCC = 5.5 V TYPICAL 250 3 6 0.2 UNIT ps pF pF A
ORDERING INFORMATION
PACKAGES 24-Pin Plastic SO 24-Pin Plastic SSOP 24-Pin Plastic SSOP (QSOP) TEMPERATURE RANGE -40 to +85 C -40 to +85 C -40 to +85 C ORDER CODE CBTD3384D CBTD3384DB CBTD3384DK DWG NUMBER SOT137-1 SOT340-1 SOT556-1 SOT355-1
24-Pin Plastic TSSOP -40 to +85 C CBTD3384PW Standard packing quantities and other packaging data is available at www.philipslogic.com/packaging.
2001 Dec 20
2
853-2215 27501
Philips Semiconductors
Product data
10-bit level shifting bus switch with 5-bit output enables
CBTD3384
LOGIC SYMBOL
1A1 3 2 1B1
FUNCTION TABLE
INPUTS 1OE L 2OE L H L H OUTPUTS 1A, 1B 1A = 1B 1A = 1B Z Z 2A, 2B 2A= 2B Z 2A = 2B Z
1A5
11
10
1B5
L H H
1OE
1
2A1
14
15
2B1
H = High voltage level L = Low voltage level Z = High impedance "off " state
2A5
22
23
2B5
2OE
13
SA00544
ABSOLUTE MAXIMUM RATINGS1, 2
SYMBOL VCC IIK VI ISW Tstg PARAMETER DC supply voltage DC input diode current DC input voltage3 DC output diode current Storage temperature range VO < 0 CONDITIONS RATING -0.5 to +7.0 -50 -1.2 to +7.0 128 -65 to +150 UNIT V mA V mA C
NOTES: 1. Stresses beyond those listed may cause permanent damage to the device. These are stress ratings only and functional operation of the device at these or any other conditions beyond those indicated under "recommended operating conditions" is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability. 2. The performance capability of a high-performance integrated circuit in conjunction with its thermal environment can create junction temperatures which are detrimental to reliability. The maximum junction temperature of this integrated circuit should not exceed 150 C. 3. The input and output voltage ratings may be exceeded if the input and output current ratings are observed.
RECOMMENDED OPERATING CONDITIONS
SYMBOL VCC VIH VIL Tamb DC supply voltage High-level input voltage Low-level Input voltage Operating free-air temperature range PARAMETER LIMITS Min 4.5 2.0 -- -40 Max 5.5 -- 0.8 +85 UNIT V V V C
2001 Dec 20
3
Philips Semiconductors
Product data
10-bit level shifting bus switch with 5-bit output enables
CBTD3384
DC ELECTRICAL CHARACTERISTICS
LIMITS SYMBOL VIK VOH II ICC ICC CI CI(OFF) ron3 PARAMETER Input clamp voltage Output high pass voltage Input leakage current Quiescent supply current2 Additional supply current per input pin2 Control pins Port off capacitance On-resistance TEST CONDITIONS VCC = 4.5 V; II = -18 mA See Figure 1 VCC = 5.5 V; VI = GND or 5.5 V VCC = 5.5 V; IO = 0, VI = VCC or GND; 1OE=2OE=GND VCC = 5.5 V, one input at 3.4 V, other inputs at VCC or GND VI= 3 V or 0 VO = 3 V or 0, OE = VCC VCC = 4.5 V; VI = 0 V; II = 64 mA VCC = 4.5 V; VI = 0 V; II = 30 mA VCC = 4.5 V; VI = 2.4 V; II = -15 mA Tamb = -40 C to +85 C Min -- -- -- -- -- -- -- -- -- -- Typ1 -- -- -- -- -- 3.2 6 5 5 17 Max -1.2 -- 1 1.5 2.5 -- -- 7 7 50 V V A mA mA pF pF UNIT
NOTES: 1. All typical values are at VCC = 5 V, Tamb = 25 C 2. This is the increase in supply current for each input that is at the specified TTL voltage level rather than VCC or GND 3. Measured by the voltage drop between the A and the B terminals at the indicated current through the switch. On-state resistance is determined by the lowest voltage of the two (A or B) terminals.
AC CHARACTERISTICS
GND = 0 V; tR = tF = 2.5 nS; CL = 50 pF LIMITS SYMBOL PARAMETER DESCRIPTION Min tpd tPZH tPHZ tPZL tPLZ Propagation delay1 Output enable time to High level Output disable time from High level Output enable time to Low level Output disable time from Low level -- 2.3 1.7 2.3 1.7 -40 C to +85 C VCC = 5 V 0.5 V Mean -- 4.3 2.4 4.9 4.2 Max 250 7.0 5.3 7.5 5.3 ps ns ns ns ns UNIT
NOTE: 1. This parameter is warranted but not production tested. The propagation delay is based on the RC time constant of the typical on-state resistance of the switch and a load capacitance of 50 pF, when driven by an ideal voltage source (zero output impedance).
2001 Dec 20
4
Philips Semiconductors
Product data
10-bit level shifting bus switch with 5-bit output enables
CBTD3384
AC WAVEFORMS
VM = 1.5 V, VIN = GND to 3.0 V
3V 1.5 V INPUT 0V tPLH tPHL VOH 1.5 V OUTPUT VOL 1.5 V 1.5 V
TEST CIRCUIT AND WAVEFORMS
7V From Output Under Test CL = 50 pF 500 S1 Open GND 500
Load Circuit
TEST tpd tPLZ/tPZL tPHZ/tPZH
S1 open 7V open
SA00028
Waveform 1. Input (An) to Output (Yn) Propagation Delays
DEFINITIONS Load capacitance includes jig and probe capacitance; CL = see AC CHARACTERISTICS for value. 3V Output Control (Low-level enabling ) tPZL Output Waveform 1 S1 at 7 V (see Note) tPZH Output Waveform 2 S1 at Open (see Note)
SA00012
1.5 V 1.5 V 0V 3.5 V 1.5 V tPHZ VOH - 0.3 V 1.5 V 0V
tPLZ
NOTES: 1. All input pulses are supplied by generators having the following characteristics: PRR 10MHz, ZO = 50 , tr 2.5 ns, tf 2.5 ns. 2. The outputs are measured one at a time with one transition per measurement.
VOL + 0.3 V VOL VOH
Note: Waveform 1 is for an output with internal conditions such that the output is low except when disabled by the output control. Waveform 2 is for an output with internal conditions such that the output is high except when disabled by the output control.
SA00029
Waveform 2. 3-State Output Enable and Disable Times
2001 Dec 20
5
Philips Semiconductors
Product data
10-bit level shifting bus switch with 5-bit output enables
CBTD3384
TYPICAL CHARACTERISTICS
OUTPUT VOLTAGE HIGH VS SUPPLY VOLTAGE 4.0 4.0 OUTPUT VOLTAGE HIGH VS SUPPLY VOLTAGE
TA = 85 C VOH - OUTPUT VOLTAGE HIGH - V 100 A 6 mA 12 mA
TA = 25 C
VOH - OUTPUT VOLTAGE HIGH - V
3.6 3.4
3.6 3.4 100 A 6 mA 12 mA 24 mA
3.0
24 mA
3.0
2.6 2.4
2.6 2.4
2.0
2.0
1.4 4.5 5 VCC - Supply Voltage - V 5.5
1.4 4.5 5 VCC - Supply Voltage - V 5.5
OUTPUT VOLTAGE HIGH VS SUPPLY VOLTAGE 4.0 VOH - OUTPUT VOLTAGE HIGH - V TA = 0 C
3.6 3.4 100 A 6 mA 12 mA 24 mA
3.0
2.6 2.4
2.0
1.4 4.5 5 VCC - Supply Voltage - V 5.5
SA00549
Figure 1. VOH values (Vin = VCC)
2001 Dec 20
6
Philips Semiconductors
Product data
10-bit level shifting bus switch with 5-bit output enables
CBTD3384
SO24: plastic small outline package; 24 leads; body width 7.5 mm
SOT137-1
2001 Dec 20
7
Philips Semiconductors
Product data
10-bit level shifting bus switch with 5-bit output enables
CBTD3384
SSOP24: plastic shrink small outline package; 24 leads; body width 5.3 mm
SOT340-1
2001 Dec 20
8
Philips Semiconductors
Product data
10-bit level shifting bus switch with 5-bit output enables
CBTD3384
SSOP24: plastic shrink small outline package; 24 leads; body width 3.9 mm; lead pitch 0.635 mm
SOT556-1
2001 Dec 20
9
Philips Semiconductors
Product data
10-bit level shifting bus switch with 5-bit output enables
CBTD3384
TSSOP24: plastic thin shrink small outline package; 24 leads; body width 4.4 mm
SOT355-1
2001 Dec 20
10
Philips Semiconductors
Product data
10-bit level shifting bus switch with 5-bit output enables
CBTD3384
NOTES
2001 Dec 20
11
Philips Semiconductors
Product data
10-bit level shifting bus switch with 5-bit output enables
CBTD3384
Data sheet status
Data sheet status [1] Objective data Preliminary data Product status [2] Development Qualification Definitions This data sheet contains data from the objective specification for product development. Philips Semiconductors reserves the right to change the specification in any manner without notice. This data sheet contains data from the preliminary specification. Supplementary data will be published at a later date. Philips Semiconductors reserves the right to change the specification without notice, in order to improve the design and supply the best possible product. This data sheet contains data from the product specification. Philips Semiconductors reserves the right to make changes at any time in order to improve the design, manufacturing and supply. Changes will be communicated according to the Customer Product/Process Change Notification (CPCN) procedure SNW-SQ-650A.
Product data
Production
[1] Please consult the most recently issued data sheet before initiating or completing a design. [2] The product status of the device(s) described in this data sheet may have changed since this data sheet was published. The latest information is available on the Internet at URL http://www.semiconductors.philips.com.
Definitions
Short-form specification -- The data in a short-form specification is extracted from a full data sheet with the same type number and title. For detailed information see the relevant data sheet or data handbook. Limiting values definition -- Limiting values given are in accordance with the Absolute Maximum Rating System (IEC 60134). Stress above one or more of the limiting values may cause permanent damage to the device. These are stress ratings only and operation of the device at these or at any other conditions above those given in the Characteristics sections of the specification is not implied. Exposure to limiting values for extended periods may affect device reliability. Application information -- Applications that are described herein for any of these products are for illustrative purposes only. Philips Semiconductors make no representation or warranty that such applications will be suitable for the specified use without further testing or modification.
Disclaimers
Life support -- These products are not designed for use in life support appliances, devices or systems where malfunction of these products can reasonably be expected to result in personal injury. Philips Semiconductors customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Philips Semiconductors for any damages resulting from such application. Right to make changes -- Philips Semiconductors reserves the right to make changes, without notice, in the products, including circuits, standard cells, and/or software, described or contained herein in order to improve design and/or performance. Philips Semiconductors assumes no responsibility or liability for the use of any of these products, conveys no license or title under any patent, copyright, or mask work right to these products, and makes no representations or warranties that these products are free from patent, copyright, or mask work right infringement, unless otherwise specified.
Contact information
For additional information please visit http://www.semiconductors.philips.com. Fax: +31 40 27 24825
(c) Koninklijke Philips Electronics N.V. 2001 All rights reserved. Printed in U.S.A. Date of release: 12-01
For sales offices addresses send e-mail to: sales.addresses@www.semiconductors.philips.com.
Document order number:
9397 750 09248
Philips Semiconductors
2001 Dec 20 12

▲Up To Search▲

Price & Availability of CBTD3384

	To Download CBTD3384 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .